Sunday, June 12, 2016
The official documentary video for WRTC2014 is now available!
The official documentary video for WRTC2014 is now available!
The video was produced by James Brooks, 9V1YC, and runs approximately 59 minutes. James took advantage of 9 roving video teams to capture high definition footage of action at headquarters and out in the field, artfully telling the WRTC2014 story using the participants’ own words.
View the video at: https://vimeo.com/119947598
Funding for video production was provided by a generous grant from the Northern California DX Foundation (NCDXF).
Wednesday, June 01, 2016
Thursday, May 19, 2016
More from N4JTE This time Two pairs of phased Verticals, no it is not a true Four Square
Scroll down to where he says "Poor Man's Four Square"
More from N4JTE
This time a pair of 40m Phased verticals
Not a Four Square but Two pair of separate Phased verticals
Saturday, May 07, 2016
Sunday, April 17, 2016
Wednesday, April 13, 2016
Tuesday, March 01, 2016
AB0X and the KCDX Club offer a great pdf file on Receive antennas
AB0X Low Band Receive antennas for small lots....
Click Here
Cheers!
steve
KG5VK
Monday, February 29, 2016
Wednesday, February 10, 2016
Wednesday, January 27, 2016
Sunday, January 17, 2016
Friday, January 08, 2016
An On Line Simple Air Coil Calculator mentioned in the Feb 2016 QSR Article by Ward Silver
Simple Air Coil Calculator
http://www.k7mem.com/Electronic_Notebook/inductors/coildsgn.html
The Impedance Matching designer link is here
http://home.sandiego.edu/~ekim/e194rfs01/jwmatcher/matcher2.html
Thanks to Ward for another great effective article
Cheers!
Steve
KG5VK
http://www.k7mem.com/Electronic_Notebook/inductors/coildsgn.html
The Impedance Matching designer link is here
http://home.sandiego.edu/~ekim/e194rfs01/jwmatcher/matcher2.html
Thanks to Ward for another great effective article
Cheers!
Steve
KG5VK
YCCC 9 element Low band Vertical RCV Array
Here is a very short Video of the performance of this array....
Note I have only finished 3 of the 9 elements
They are in a line N.E. / S.W.
The control cable was only two lines for power, none for switching
They are in a line N.E. / S.W.
The control cable was only two lines for power, none for switching
So the only switching in this first use
is The Array (RX ANT) Versus the Transmit antenna (which is a long legged Vee Beam)
I will be posting more Videos of this very impressive antenna soon.
I will be posting more Videos of this very impressive antenna soon.
Cheers!
Steve
KG5VK
Wednesday, January 06, 2016
Monday, January 04, 2016
Nearly end of the day at "Area 57"
Nearly End of The daylight Hours
at
"Area 57"
Finished up the roughed in plumbing and started hooking up a few appliances like a whirlpool tub
HVAC system will get installed in a couple of weeks
HVAC system will get installed in a couple of weeks
Tomorrow I spend a little more time perfecting the three elements of the 9 ele YCC low band receive array, while we have another day of sunshine here.
Mean while I just worked a new one on 80m cw
ES3AX August in Estonia
ES3AX August in Estonia
Cheers!
Steve
Tuesday, December 01, 2015
Monday, November 30, 2015
AutoEZ: Transmission Lines - Tuners - Stacks - Stubs
AutoEZ: Transmission Lines - Tuners - Stacks - Stubs
Wow !!! This is an awesome tool set !
I am far from a EZNEC Guru
but AutoEZ makes using the software so much easier AND Brings much more to the table
Like telling me where my stub should be placed in the line for harmonic suppression !
Very versatile tool !
Many thanks to Dan for developing this app !
Cheers!
Steve
KG5VK
Wow !!! This is an awesome tool set !
I am far from a EZNEC Guru
but AutoEZ makes using the software so much easier AND Brings much more to the table
Like telling me where my stub should be placed in the line for harmonic suppression !
Very versatile tool !
Many thanks to Dan for developing this app !
Cheers!
Steve
KG5VK
Subscribe to:
Posts (Atom)